Edimax EW-7416APN V2 Instrukcja Użytkownika Strona 39

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 89
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 38
39
you are familiar with this setting.
RTS Threshold
Set the RTS threshold of the wireless radio. The default
value is 2347 - please do not modify unless you are
familiar with this setting.
Beacon Interval
Set the beacon interval of the wireless radio. The
default value is 100 - please do not modify unless you
are familiar with this setting.
DTIM Period
Set the DTIM period of wireless radio. The default
value is 3 - please do not modify unless you are
familiar with this setting.
Data Rate
Set the wireless data transfer rate. The default is set to
Auto - please do not modify unless you are familiar
with this setting.
N Data Rate
Set the data rate of 802.11n. The default is set to Auto
- please do not modify unless you are familiar with
this setting.
Channel Width
Select wireless channel width (bandwidth used by
wireless signals from the access point) the
recommended value is Auto 20/40MHz please do not
modify unless you are familiar with this setting.
Preamble Type
Set the wireless radio preamble type. The default value
is “Short Preamble” - please do not modify unless you
are familiar with this setting.
Broadcast ESSID
Set if the access point will broadcast its own ESSID. To
hide the ESSID of your access point select Disable -
only users who know the ESSID of your access point will
be able to connect.
WMM
WMM (Wi-Fi Multimedia) technology can improve the
performance of certain network applications, such as
audio/video streaming, network telephony (VoIP), and
others. When WMM is enabled, the access point will
prioritize different kinds of data and give higher priority
to applications which require instant responses. This
improves the performance of such network
applications.
CTS Protect
Enabling this setting will reduce the chance of radio
signal collisions between 802.11b and 802.11g wireless
access points. Its recommended to set this option to
Auto.
TX Power
Set the power output of the wireless radio. Unless
you’re using the access point in a very large space, you
Przeglądanie stron 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 88 89

Komentarze do niniejszej Instrukcji

Brak uwag