Edimax EW-7416APN V2 Instrukcja Użytkownika Pobierz pdf (Strona 22)

III. Browser Based Configuration Interface

Once you have setup the access point in its desired operating mode as

detailed in II. Quick Installation, you can further configure the settings of the

access point anytime using the browser based configuration interface.

Note: You may need to modify the IP address of your

PC or Macintosh before you can access the browser

based configuration interface.

This is because the access point’s default IP address

192.168.2.1 may not be in the same IP address subnet

as your network. In this case, you need to modify the

IP address of your PC or Macintosh to 192.168.2.10.

For guidance on how to do this, please see Appendix

IV-1. Configuring your IP Address.

To access the browser based configuration interface, enter the access point’s

default IP address “http://192.168.2.1” into the URL bar of a web browser on

a computer which is connected to the access point’s Wi-Fi network, or via

Ethernet cable as explained in II. Quick Installation steps 1 - 2.

Note: If you modified the IP address of the access

point during iQ Setup then enter this IP into the URL

bar of a web browser instead of the default IP

192.168.2.1

Note: For your reference, the access point’s default IP

address, username and password are all displayed on

the product label on the underneath of the device, as

shown below.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 88 89

Brak uwag

Edimax EW-7416APN V2 Instrukcja Użytkownika Strona 22