Edimax WAP1750 Instrukcja Użytkownika Pobierz pdf (Strona 176)

Edimax Pro NMS

170

IV-6-4. WPS

Wi-Fi Protected Setup is a simple way to establish connections between WPS

compatible devices. WPS can be activated on compatible devices by pushing a

WPS button on the device or from within the device’s firmware/configuration

interface (known as PBC or “Push Button Configuration”). When WPS is

activated in the correct manner and at the correct time for two compatible

devices, they will automatically connect. “PIN code WPS” is a variation of PBC

which includes the additional use of a PIN code between the two devices for

verification.

Please refer to manufacturer’s instructions for your other WPS

device.

WPS

Check/uncheck this box to enable/disable WPS

functionality. WPS must be disabled when

using MAC-RADIUS authentication (see

IV-6-2-3-6. & IV-6-5).

Product PIN

Displays the WPS PIN code of the device, used

for PIN code WPS. You will be required to enter

this PIN code into another WPS device for PIN

code WPS. Click “Generate PIN” to generate a

new WPS PIN code.

Push-Button WPS

Click “Start” to activate WPS on the access

point for approximately 2 minutes. This has the

same effect as physically pushing the access

point’s WPS button.

WPS by PIN

Enter the PIN code of another WPS device and

click “Start” to attempt to establish a WPS

connection for approximately 2 minutes.

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 231 232

Brak uwag

Edimax WAP1750 Instrukcja Użytkownika Strona 176