Edimax EdiView Instrukcja Użytkownika Strona 1

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Oprogramowanie Edimax EdiView. Edimax EdiView User manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 131
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów

Podsumowanie treści

Strona 1 - User Manual

IC-3115W User Manual 07-2012 / v1.1

Strona 2

9 Chapter II: Accessing the EdiView Finder Utility 2.1 Edimax Ediview Installation Package The network camera package includes a CD-ROM that contai

Strona 3

99 2. Drag the slider bars right or left to configure brightness, saturation, sharpness, video quality, and pan/tilt speed. 3. Tap Done to save

Strona 4

100 3.6 Using the Android Surveillance Software 3.6.1 Software Overview Main Menu Buttons To show the EdiView menu buttons, press

Strona 5 - Chapter I: Introduction

101 Show information about the EdiView application 3.6.2 Viewing the Camera List Viewing a Live View If the network camera is connected, youll s

Strona 6 - 1.2 Hardware Overview

102 Viewing Multiple Cameras If you have more than one network camera, tap the icon to see the images of up to four network cameras at the same t

Strona 7

103 All events are displayed along with the time when the event was triggered. Tap on the event to see an enlarged pic

Strona 8

104 To save a snapshot of this event, tap the button. The message Event image saved indicates that the image has been saved succes

Strona 9

105 3.6.3 Mapping a Camera The mapping feature can be used to mark the location of the network camera on Google Maps. An active Internet connection

Strona 10

106 When you find the location where a network camera is installed, press the Menu button on your Android device and tap Locate. A c

Strona 11

107 3.6.4 Refreshing the Camera List If new cameras are added or removed from the network, scan the network again to update your camera list. To upd

Strona 12

108 3.7 Configuring the iOS Surveillance Software 3.7.1 Installing the iOS Surveillance Software 1. Tap Edimax Ediview to download and install th

Strona 13

10 2.2 Installing the Ediview Finder Utility Software 1. Click the Setup Utility icon to start the installation wizard. 2. Click N

Strona 14

109 3.7.2 Adding Network Cameras There are two ways to add a network camera to the camera list:  Automatically scan and add available cameras lo

Strona 15

110 3. If no camera is found, an empty list is shown. Tap Add New Camera to manually add a new network camera. Manually Adding a Network Camera o

Strona 16

111 Manually Adding a Network Camera on the Cloud in Cloud Mode 1. Tap the Cloud/IP Mode button to set the mode to Cloud. 2. Ent

Strona 17

112 3.7.3 iOS Surveillance Software Configuration Options Tap a camera in the list to edit the configuration settings. Configuring N

Strona 18

113 Parameter Description Camera Name Define a name for the camera that is shown in the camera list. IP Address Enter the IP address of a network c

Strona 19

114 Username Enter the username of the network camera. The default value is admin. Password Enter the password of the network camera. The default val

Strona 20

115 Note: Use a lower video quality when network bandwidth is low. 2. Tap Done to save the changes. Tap Cancel to discard the changes. Removing

Strona 21

116 3. Tap Delete to remove the network camera from the list. 3.8 Using the iOS Surveillance Software 3.8.1 Software Overview Main

Strona 22

117 Show a list of available network cameras, or add a new network camera to the list. Show information about the EdiView application 3.8.2 Viewin

Strona 23

118 3.8.3 Viewing Camera Events Viewing an Event Image To view events, which are motions detected by the network camera, tap the Events button.

Strona 24

11 3. To set the application installation folder: Click Next to use the default value, or Click Browse to select a different location on your fil

Strona 25

119 Tap an event to see an enlarged image. 3.8.4 Mapping a Camera The mapping feature can be used to mark the location of the network

Strona 26

120 Google Maps is shown on the iOS device. It attempts to locate the current location of the camera by GPS and the network. Note: Using the iOS de

Strona 27

121 Appendix A Troubleshooting Please dont panic when you found this IP Camera is not working properly. Before you send this IP Camera back to us,

Strona 28

122 Appendix B This IP cameras default IP address is 192.168.2.3, and you must use a computer that uses 192.168.2.x IP address to connect to it.

Strona 29

123 3. If you didnt see Network and Internet in control panel, please look for Network and Sharing Center icon and double-click it. 4. Click

Strona 30 - 3.2.2.1 Network

124 7. Click Use the following IP address, and then input 192.168.2.1 in IP address and 255.255.255.0 in Subnet mask, just like shown on t

Strona 31

125 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital

Strona 32 - 3.2.2.2 Wireless

126 Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies

Strona 33

127 Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License versio

Strona 34

128 intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this

Strona 35

12 5. The application is ready to install. Review the installation settings in the information window. Click Install to continue or Back to retur

Strona 36 - 3.2.2.3 Dynamic DNS

129 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original l

Strona 38 - 3.2.2.5 Users

13 7. EdiView Finder is installed. Click Launch EdiView Finder Utility if you want to use the application after the installation is finished. Click

Strona 39 - 3.2.2.6 UPNP

14 2. The utility automatically detects the cloud connection. 3. When the utility prompts to configure wireless settings

Strona 40 - 3.2.2.7 Bonjour

15 4. Pick the SSID for the wireless router and enter the password. Alternatively, run WPS mode to connect to the wireles

Strona 41 - 3.2.3.1 Video Settings

16 5. Unplug the network cameras Ethernet cable and click Next. 6. When the network camera has successfully connecte

Strona 42

17 7. Enter a camera name, and enter a password (twice, for confirmation) for the camera. If no password is entered, the default 1234 is

Strona 43 - 3.2.4.1 Motion Detection

18 2.4 Locating Network Cameras on the Network The network camera comes with a software utility, called EdiView Finder, which locates and sets up ne

Strona 44

1 COPYRIGHT Copyright  Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed,

Strona 45

19 Connection information for a network camera is displayed in each listing under IP Address. Other camera related information, such as the came

Strona 46

20 3. Click OK to open a preview window, or Cancel to close the login window.

Strona 47

21 Chapter III: Configuring the Surveillance Software 3.1 Configuring the EdiView Finder Utility The EdiView Finder utility provides the ability to

Strona 48

22 Setting the Interface Language The utility software supports three languages: English, traditional Chinese, and Simplified Chinese. You can selec

Strona 49 - 3.2.5.1 Basic

23 3. Select DHCP to have the network router designate an IP address, or select Static IP to enter the designated IP addres

Strona 50 - 3.2.5.2 Advanced

24 4. To modify additional settings, Advanced. 5. Click OK to save the changes and exit the dialogue box.

Strona 51 - 3.2.6.1 System Information

25 3.2 Configuring the Web-Based Management Interface 3.2.1 Installing the Web-Based Management Interface Viewing the Web-Based Management Interfac

Strona 52 - 3.2.6.2 System Log

26 4. If the following prompt appears, click OK. 5. Click Download the latest ActiveX link to download the plugin. 6. Click Run

Strona 53

27 8. Click Next to start the installation, and following on-screen setup wizard until the installation is complete. 9.

Strona 54 - 3.3 Configuring myedimax.com

28 The management interface screen is now displayed on the browser. Press F5 or CTRL-R to reload the web page if the configuratio

Strona 55

2 Contents Chapter I: Introduction ...

Strona 56

29 3.2.2 Basic Settings 3.2.2.1 Network To configure network settings, Select Network from the menu.

Strona 57 - 3.3.3 Using myedimax.com

30 Item Description Network Type Select the type of Ethernet connection: Static IP, DHCP, and PPPoE. Please select one from dropdown menu. If youre

Strona 58

31 next time, it will be necessary to add a colon and port number after the cameras IP address. For example, if the cameras IP address is 192.168.2

Strona 59

32 Item Description Wireless Connection You can enable or disable wireless functionality here. Please note: You can switch wireless n

Strona 60

33 networks of same operating mode. Band Select the wireless band: 20MHz only or 20/40MHz auto switch. Its recommended to select Auto 20/40MHz. Av

Strona 61

34 WEP: Use WEP encryption WPA-PSK: Use WPA with PSK encryption. WPA2-PSK: Use WPA2 with PSK encryption. The authentication type you select here

Strona 62

35 This setting must be identical to the settings of the network you wish to connect to. 3.2.2.3 Dynamic DNS If your Internet service provider do

Strona 63

36 3.2.2.4 Date and Time You can set up the cameras system date and time here. Maintaining a correct date and time is essential for replaying rec

Strona 64

37 select Enable, or select Disable if daylight saving is not used. 3.2.2.5 Users Apart from the default admin operator account, you can add

Strona 65 - 3.4.3.1 “Camera” Settings

38 Modify Click this button to save changes to an existing user. Remove Click this button to remove a user. You must select a user in the User Lis

Strona 66

3 3.4.7 Scan ...

Strona 67 - 3.4.3.2 Scheduled Recording

39 Item Description Enable IGD Enable or disable the "UPnP IGD" function. The "UPnP IGD" function help you to configure the NAT i

Strona 68

40 3.2.2.8 Language Set the configuration systems language here. There are ten options. 3.2.3 Video 3.2.3.1 Video Settings H

Strona 69

41 Item Description Resolution Change the video resolution from the dropdown list. Available resolutions are: SXVGA (1280 x 960) VGA (640

Strona 70 - 3.4.3.3 Audio

42 3.2.3.2 Image Appearance Change video image appearance settings here. Item Description Brightness / Contrast / Saturation / Shar

Strona 71

43 Item Description Motion Detection enable Select Enable to enable motion detection, or Disable to disable it. Motion Det

Strona 72

44 Disable to disable this feature. Detection Region You can set up the areas in the video where the camera will detect changes in video. Motions

Strona 73 - 3.4.4 General Options

45 To move the motion detection region, position the mouse within the motion detection area, and drag the mouse. Sensitivity Change the sensitivity

Strona 74

46 User Name Input the user name required by the FTP server. Password Input the password of the FTP server. Port Input the port number of the FTP ser

Strona 75 - 3.4.4.2 Email Setting

47 Item Description Public Server If youre using Hotmail, Yahoo mail, or Google mail, select the appropriate item from dropdown menu. The camera wil

Strona 76

48 You can click Send a Test E-Mail to send a test e-mail to the designated recipient address, to determine if the parameters set here are correct.

Strona 77 - 3.4.4.3 Security

4 Chapter I: Introduction 1.1 Package Contents Please check the contents of your new Network IP Camera when you unpack the package. If any item is m

Strona 78

49 3.2.5.2 Advanced Item Description Firmware Filename You can improve the functionality of this camera by uploading new firmware files wh

Strona 79 - 3.4.4.4 About

50 back to default values, except network settings. You can still use the same IP address to connect to the IP camera. 2) Factory Default: Reset all

Strona 80

51 3.2.6.2 System Log The network cameras usage and actions will be displayed here.

Strona 81

52 Item Description Log Level Select the log level from the dropdown list. Select 0 and the network camera will only log very important information,

Strona 82

53 3.3 Configuring myedimax.com The images from the network camera can be viewed from a computer remotely, as long as Internet access is available a

Strona 83 - 3.4.6 Full-Screen Mode

54 3. When the Java applet loads, enter the cameras password. The default password is 1234. Click OK to continue.

Strona 84

55 3.3.2 Configuring the Network Camera from myedimax.com The network camera can be operated and configured by clicking the c

Strona 85 - 3.4.8 Zoom-in/Zoom-out

56 2. Use the slider controls to change the image brightness, saturation, sharpness, video quality, pan & tilt speed, video resolution, and la

Strona 86 - 3.4.9 PTZ

57 3.4 Configuring the Desktop 16-Channel Viewer An alternative to the web-based interface is the desktop 16-Channel Viewer software, which offers t

Strona 87 - 3.4.10 Snapshot

58 2. Click Browse to set the application installation folder, or leave the default folder unchanged if you prefer. Click Next to

Strona 88 - 3.4.11 Recording

5 1.2 Hardware Overview Front Item Description Power/Cloud LED When the camera is first turned on, the LED will flash while the ca

Strona 89 - 3.4.12 Video Playback

59 3. To set the application startup options, select Create a desktop icon to add an application icon to the desktop. Select Create a Quick Launch

Strona 90

60 5. The installation process is displayed in the following window. This step may take several minutes to complete. 6. Click Finish

Strona 91

61 3.4.2 Using the 16-Channel Viewer You can click the IPCam Surveillance Software icon or link from your desktop, quick launch bar, or Start Me

Strona 92 - 3.5.2 Adding Network Cameras

62 Item Description Video display area The images from all connected cameras will be displayed here. Language Select a language from this

Strona 93

63 Scan Click this button and the 16-Channel Viewer will switch through the images of all connected cameras automatically. Click this button once to

Strona 94

64 Minimize window Minimizes the 16-Channel Viewer software window. Video display area Displays the images of all cameras according to the display

Strona 95

65 Item Description Channel Select the channel number you wish to set. Camera Search All cameras found on your local network will be displayed in the

Strona 96

66  the 16-C

Strona 97

67 Item Description Channel Select the channel number you wish to set. One Time Schedules You can specify a one-time schedule for the selected camera

Strona 98

68 You can define a recording schedule that will be executed at the specified time of certain day(s) in the week. Please check all days that apply,

Strona 99

6 Back Item Description Mount Connector Attaches to the enclosed mounting kit, which allows the camera to stand or t

Strona 100

69 3.4.3.3 Audio For cameras that support audio, you can use this tab to decide if you wish to hear the audio captured by the selected camera.

Strona 101 - 3.6.1 Software Overview

70 3.4.3.4 Motion-Triggered Recording With this function activated, only motions captured by the camera will be record

Strona 102

71 when motion is triggered motion has been detected by the camera. OK Save settings in this tab. Cancel Discard all settings in this tab.

Strona 103

72 3.4.4 General Options You can set system-wide settings for the 16-Channel Viewer software in this menu. 3.4.4.1 General All general settings

Strona 104

73 Item Description Data Directory Set the directory (folder) you wish to store the recorded video and captured image. You can 

Strona 105

74 3.4.4.2 Email Setting If you want to use motion detection function and wish to get an email that contains the image captured by the camera, pleas

Strona 106 - 3.6.3 Mapping a Camera

75 New changes. Edit 

Strona 107

76 your email software or ask your ISP / network administr SMTP Password Input the SMTP password of your SMTP serv

Strona 108

77 Here are the descriptions of all setting items: Item Description Enable Requires password authentication when this software starts. Disable Pas

Strona 109

78 3.4.4.4 About This tab shows the version number of the 16-Channel Viewer using.

Strona 110 - 3.7.2 Adding Network Cameras

7 1.3 Installing the Network Camera Please follow the following instructions to setup your new network camera. 1. Remove the camera and its acces

Strona 111

79 3.4.5 Changing the Display Layout This 16-Channel Viewer software provides 8 display layouts: Every layout displays a different number of ca

Strona 112

80 Layout style 3: 6 Cameras Displays the video of up to 6 cameras. Layout style 4: 8 Cameras Displays the video of up to 8 cameras

Strona 113

81 Layout style 7: 13 Cameras Displays the video of up to 13 cameras. Layout style 8: 16 Cameras Displays the video of up to

Strona 114

82 3.4.6 Full-Screen Mode If you want to use all available space on your monitor to display surveillance images, you can click the 

Strona 115

83 3.4.7 Scan If you have more than one camera configured, and you wish to switch the 

Strona 116

84 3.4.8 Zoom-in/Zoom-out For cameras that support the zoom-in / zoom-out function, you can use this 

Strona 117 - 3.8.1 Software Overview

85 3.4.9 PTZ For cameras that support pan - tilt functions, you can change the position that 

Strona 118

86 3.4.10 Snapshot -folder of pre-defined data directory. Click snap

Strona 119 - 3.8.3 Viewing Camera Events

87 3.4.11 Recording ton: 

Strona 120 - 3.8.4 Mapping a Camera

88 3.4.12 Video Playback You can playback all recorded video by clicking this button. A new window will appear: You have to search the v

Strona 121

8 6. After installation, the Power/Cloud LED will flash for 10 to 15 seconds while the camera connects to the cloud. When the LED stop

Strona 122 - Appendix A

89 3.5 Configuring the Android Surveillance Software 3.5.1 Installing the Android Surveillance Software 1. Launch the Android Market.

Strona 123 - Appendix B

90 3. Tap ediview to download and install the app. 4. At the installation confirmation screen, tap Install to start installation o

Strona 124

91 5. When the application is successfully installed, Application installed will appear on the screen. 6. Tap Open to launch the

Strona 125

92 2. If a camera is found, it is shown in the camera list.

Strona 126

93 3. If no camera is found, tap OK to close the information dialogue. 4. Tap Manually to manually add a new network camera.

Strona 127 - Declaration of Conformity

94 Manually Adding a Network Camera on a LAN in IP Mode Note: cameras added in IP mode can only be accessed on the local network. 1. Tap the Cloud

Strona 128

95 Manually Adding a Network Camera on the Cloud in Cloud Mode 1. Tap the Cloud/IP Mode button to set the mode to Cloud. 2. Ente

Strona 129

96 3.5.3 Android Surveillance Software Configuration Options Tap a cameras icon in the list to edit the configuration settings.

Strona 130

97 Parameter Description Camera Name Define a name for the camera that is shown in the camera list. IP Address / DDNS Enter the IP address of the hos

Strona 131

98 Parameter Description Camera Name Define a name for the camera that is shown in the camera list. Cloud ID Enter the Cloud ID of the network camera

Komentarze do niniejszej Instrukcji

Brak uwag