Edimax IC-3030i Wired Triple mode IP camera Instrukcja Użytkownika

9 WPS: click the button on IP Cam and click it on the AP you want to connect wireless connection.(works on wired model with USB w

99 Layout style 7: 13 Cameras Displays the video of up to 13 cameras. Layout style 8: 16 Cameras Displays the video of up to

100 3-5 Full-screen mode If you want to use all available spaces on your monitor to display surveillance image, you can click „Full Screen‟ button t

101 3-6 Scan If you have more than one camera configured, and you wish to switch the displaying image between cameras, you can click „Scan‟ button t

102 3-7 Zoom-in / Zoom-out For cameras that support zoom-in / zoom-out function, you can use this function to see more objects that fall in the scop

103 3-8 PTZ For cameras that support pan - tilt function ( but this model doesn‟t support PTZ function), you can change the position that camera p

104 3-9 Snapshot You can take a snapshot of selected camera and save it to „Snapshot‟ sub-folder of pre-defined data directory. Click snapsh

105 3-10 Recording You can start video recording of selected camera manually by clicking „Start Recording‟ button: When recording starts, y

106 3-11 Video Playback You can playback all recorded video by clicking this button. A new window will appear: You have to search the vi

107 Chapter IV: Appendix 4.1 Specification Max Resolution: 1280 x 1024 pixels Sensor: 1.3Mega pixels 1/4" color CMOS sensor Gain control: Auto

108 4.2 Troubleshooting If the IP camera is not working properly, before you contact the dealer of purchase for help, please check the troubleshooti

10 Tripod Connector: Connects to any standard tripod / camera wall holder. MAC Address Label: Shows the MAC address of this IP camer

109 c. If you‟re connecting this camera from Internet, it could be caused by a slow Internet connection, and it‟s not a problem caused by camera. How

110 I set the IP camera to send image by Email or FTP, but nothing is received a. If the image is send by Email, please make sure it‟s not blocked by

111 4.3 Obtain a free Dyndns account If your ISP is issuing dynamic (non-static) IP address to you and you can‟t connect to your IP camera when you

112 3. Click „Create an Account‟ in pop-up menu. 4. Fill all fields appear in this menu, and click „Create Account‟ button to create a new accou

113 5. When you see this image, you‟ll receive an e-mail confirmation at the e-mail box you registered with dyndns.org. 6. Check your e-mail box

114 7. When you see „Account Confirmed‟ webpage, indicates your dyndns.org account has been confirmed and activated. Now you can click „Create a dyn

115 9. In this page: Input the hostname of your choice in „Hostname‟ field, Select a domain name in dropdown menu, Select „Host with IP address‟ fo

116 11. Click „Next‟ to continue. 12. Click „Activate Services‟ to continue. 13. When you see this message, indicates your free dyndns.org hostn

117 4.4 Use this IPCAM with a router or firewall If this IPCAM is not directly connected to Internet (behind router or firewall), you‟ll need to set

118 3. Enable Dynamic DNS function, select „DynDNS‟ as service provider, and fill the information you obtained from Dyndns.org into Domain name, Acc

11 1.5 Descriptions for LED Indicators LED Name Status Description Power Off Camera is not powered (camera off) On Camera is correctly powered (came

119 IP CAM web configuration and view live image: 80 AV Control Port: 4321 RTSP: 554 and 50000 to 60000 Please note that if you changed the port num

120 4.5 Using Cellphone as Image Viewer You can use your cellphone to connect to this IP CAM and view captured image. Currently this IP CAM supports

121 3. Enter user name & password for the Edimax IP camera. By default, user name is admin and password is 1234.

122 4. You‟ll see the image of connected camera displayed on upper-left corner of quad-split screen. If you have more than one IP CAM, you can add

123 4.6 Windows Vista / Windows 7 UAC Configuration When you attempt to save a snapshot or record video file, you will see UAC (User Account Control

124 c. Add IP Camera‟s IP address to „Trusted sites‟ in Internet Explorer‟s security setting (RECOMMENDED) Input IP CAM’s IP address here!

125 d. If you don‟t want to change Internet explorer‟s security setting, you can run Internet explorer as administrator as workaround.

126

12 1.6 Camera Installation Please follow the following instructions to set your IP camera up. 1. Unpack the product package and check if anything‟

13 1.7 Locate the IP Address of this IP Camera Default IP address of this IP camera is 192.168.2.3. If you wish to assign another IP address to this

14 2. Double-click „Network Connections‟ icon. 3. Right-click „Local Area Connection‟, and click „Properties‟.

15 4. Select „Internet Protocol (TCP/IP)‟, then click „Properties‟.

16 5. In „IP address‟ field, please fill in any IP address begins with „192.168.2‟, and ends with a value greater than 2 and less than 254 (You can

17 1.8 Using Camera Admin Software to Locate Camera If you can‟t connect to the camera by the instructions given in last chapter, you can use camera

18 3. Click „Next‟ to start install camera admin software: 4. You can change the installation folder of camera setup software here, click „Browse‟

1 COPYRIGHT Copyright  Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed,

19 5. If you wish to create desktop icon and / or quick launch icon for camera admin software, please check corresponding box, and click „Next‟ to co

20 7. When you see this message, the installation of camera admin software is complete. If you wish to launch camera admin software now, keep „Launch

21 All camera-related information will be displayed here. If you wish to connect to certain camera by web browser, double-click the camera listed her

22 Input the password (default: 1234) and click OK to configure the camera‟s network and security setting: In „Lan Setting‟ page, you can config

23 In „Security‟ page, you can change the camera‟s name and password (user name is always „admin‟ and cannot be changed). You have to input the same

24 1.9 Log Onto Web Management Interface Make sure the IP camera is correctly powered (Power LED is on), and then launch Internet Explorer and type

25 If this is the first time you log onto web management interface, you‟ll be prompted to install ActiveX Plugin: When you see this message, pleas

26 Click „Run‟ to install plugin: Please click „Next‟ button to start installation (click „Next‟ or „Install‟ when you‟re prompted, until installa

27 Click „Finish‟ to complete plugin installation. Now you can go back to web browser, and you should be able to see the image captured by camera

28 Note: If you see one of these messages (or both): Your computer may not have the display capability that this IP camera requir

2 CONTENTS Chapter I: Familiar with your Internet IP Camera ... 4 1.1 Package Contents ...

29 Chapter II: Using Web Management Interface 2.1 Camera Settings The first menu after you logged onto web management interface is „Camera‟, and th

30 The descriptions of every setting in this menu will be given below: Item Description Video Type Specifies video encoding type. Available options

31 can change the directory by clicking the text input box located at the right of „Snapshot‟ button: and you‟ll be prompted to select a new direc

32 mode (uses all available space to display the image captured by this camera). *Please note: If you‟re not using Microsoft Internet Explorer as w

33 2.2 Video You can change video-related settings of this IP camera in „Video‟ menu. You can access this menu by clicking „Video‟ on the top of web

34 2.1.1 MJPEG You can adjust video settings when you select „MJPEG‟ as video type in „Camera‟ menu. The descriptions of every setting in this men

35 2.1.2 MPEG4 You can adjust video settings when you select „MPEG4‟ as video type in „Camera‟ menu. The descriptions of every setting in this men

36 2.1.3 H.264 You can adjust video settings when you select „H.264‟ as video type in „Camera‟ menu. The descriptions of every setting in this men

37 2.1.4 OSD If you need to display information about this camera, like camera‟s name or current date / time, you can use OSD (On-Screen Display) men

38 2.1.5 Night Vision This camera equips with 10 IR LEDs to enhance video quality in the night. You can enable or disable IR LEDs by „Night Vision‟ m

3 3-2 Using IP camera surveillance software ... 79 3-3 Configure IP camera surveillance software ...

39 2.2 Network Settings All network-related settings can be found in this menu, and you have to specify TCP/IP parameters in this menu if you want

40 2.2.1 LAN You can define IP address and select the port number you wish to use here.

41 The descriptions of every setting in this menu will be given below: Item Description Network Type This camera can obtain the IP address from DHCP

42 performance. Click „Apply‟ to save settings and make the new settings take effect.

43 2.2.2 WLAN The descriptions of every setting in this menu will be given below: Item Description Wireless Connection Select „Enable‟ to activat

44 point). You can set to „Adhoc‟ when you don‟t have any wireless access point, but your computer has wireless network card. Set to „Infrastructure

45 SSID Input the SSID of the wireless access point you wish to connect. It should be less than 32 alphanumerical characters. When you select a wire

46 2.2.3 Dynamic DNS If your ISP does not give you a fixed Internet IP address (i.e. the Internet address you‟re using when you access the Internet

47 2.2.4 UPnP When UPnP function is activated, all UPnP-compatible computers / network devices will be able to discover this IP camera automatically

48 Click the message to open „My Network Places‟, and you‟ll see the IP camera: You can double-click the icon to launch Internet Explorer and log

4 Chapter I: Familiar with your Internet IP Camera 1.1 Package Contents Thank you for purchasing this IP camera! Before you start to use this IP ca

49 2.2.5 LoginFree This camera provides a method to let unauthorized users to view the image captured by this camera, which is called as „LoginFree‟

50 2.2.6 RTSP If you want to watch video captured by this IP camera by your own RTSP (Real Time Streaming Protocol) media player, you can use this f

51 2.3 Motion Detection When you wish to use this camera to monitor the activities, motion detection function will be very useful. Camera will detect

52 2.3.1 Motion Detection You can use this menu to setup basic motion detection settings: The descriptions of every setting in this menu will be

53 Recording Time Select the duration you wish this camera to record image when a motion is detected from dropdown menu. Available options are 1, 2,

54 2.3.2 Motion Region You can define the motion detection region within the image that camera captures, so this camera will ignore motions which are

55 Sensitivity Move the slide bar to change the motion detection sensitivity setting: Drag the slide to the right to increase sensitivity (camera wil

56 2.3.3 Email You can define the destination address of E-mail sending and mail server parameters here. The descriptions of every setting in thi

57 select „Disable‟ to disable it. If you don‟t know, please refer to the SMTP server you‟re using in your Email software (like Outlook, Outlook Expr

58 2.3.4 FTP Configuration You can set FTP server‟s parameters here. The descriptions of every setting in this menu will be given below: Item De

5 1.2 Basic Introduction Thank you for purchasing this Internet IP camera! This IP camera is an ideal product for all kinds of video-surveillance pu

59 found that non-passive mode is not working, you can try to use passive mode. Click „Apply‟ to save settings and make the new settings take effect

60 2.3.5 SD Card Configuration You can define the filename and destination folder when saving a file in SD card. The descriptions of every settin

61 2.4 System Info You can use this menu to get the operational information of this camera: After you selected „System Info.‟, a sub-menu will ap

62 2.4.1 Camera Information Camera information allows you to set the name and administrator‟s password of this camera. The descriptions of every

63 2.4.2 Date / Time Setting This setting allows you to change the date and time of the real time clock in this IP camera. You can set the time manu

64 Time „Yes‟; otherwise select „No‟. Synchronize to PC time Click to input current time of your computer to „Set Date / Time manually‟ field. Click

65 2.4.3 Utilities This menu allows you to upgrade firmware, clear all settings, reboot the IP camera, and switch LED lights on/off. The descript

66 setting of your computer if the IP address of your computer does not begin with ‘192.168.2’, and subnet mask is not ‘255.255.255.0’, or you’ll not

67 2.4.4 Status This menu provides all information about this IP camera, like firmware version, system uptime, date / time, and network information.

68 2.5 Account If you wish to allow other people to view the live image captured by this camera, but don‟t want to allow them to modify system setti

6 1.3 Product Highlights No pre-loaded software required - all you need is a browser like Internet Explorer 6 (and above, with plugin installed).

69 Modify Modify an existing user‟s information. You have to select a user from user list first. Remove Remove an existing user. You have to select a

70 2.6 SDHC … After you selected „System Info.‟, a sub-menu will appear. There are 4 sub-menus available here: Please click the SD card setting

71 2.5.1 Status Here shows the remaining card space for you.

72 2.5.2 Space Alarm When you‟re using SD card to store captured image and video clip, you can have this camera to send an E-mail to you when there‟s

73 reserved and will not be used from dropdown menu. Click „Apply‟ to save settings and make the new settings take effect. You can click „Send a

74 2.5.3 File Management You can use this menu to manage the files stored on SD card. The descriptions of every setting in this menu will be give

75 Chapter III: Using Surveillance Software 3-1 Installing IP Camera Surveillance Software The IP camera surveillance software provides various fun

76 3. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, than click „Next‟ to

77 4. Here lists all options you chose in previous steps, if everything‟s correct, click „Install‟ to start installing procedure, or click „Back‟ to

78 6. When you see this window, it means the software installing procedure is complete. Please click „Finish‟ to finish the procedure (IP camera surv

7 1.4 Familiar with Key Components LAN LED: Indicates LAN activity WLAN LED: Indicates Wireless LAN activity (only work

79 3-2 Using IP camera surveillance software You can click „IPCam Surveillance Software‟ icon from desktop, quick launch bar, or start menu to start

80 You can put the mouse cursor on a certain component and see its button name, and here‟re detailed descriptions of all buttons: Item Description V

81 Playback Playback a recorded video file. Snapshot Take a snapshot of current camera. Message display Displays all system messages like camera is

82 3-3 Configure IP camera surveillance software 3-3-1 Configure cameras Before you use this IP camera surveillance software, you must configure th

83 3-3-1-1 „Camera‟ tab In this tab you can configure all cameras you wish to connect. Up to 16 cameras can be connected simultaneously: Here are

84 location of purpose easily. Model Displays the model of selected camera, this field can not be changed. IP* Input the IP address of camera. User

85 3-3-1-2 Schedule Recording In this tab, you can setup scheduled video recording, so you can record the video captured by all cameras you have by

86 Please specify the time duration of this one-time schedule (the date and time of „From‟ and „To‟), then click „OK‟ to save settings. Please not

87 Please check all weekdays that applies, and set the start time in „From‟ field. You can set the duration of video recording in „Period‟ field (for

88 3-3-1-3 Audio For cameras that support audio, you can use this tab to decide if you wish to hear the audio captured by selected camera. Here a

8 Wired model POE model Wireless model SD Card Slot: Accepts SD / SD-HC memory card for image / video storage USB Port: Connects to certa

89 3-3-1-4 Motion Record With this function activated, only motions captured by the camera will be recorded, so you don‟t have to waste hard disk st

90 when motion is triggered camera. Send mail when motion is triggered Send an email to a pre-defined address when a motion has been detected by the

91 3-3-2 General Settings You can set system-wide settings of this IP camera surveillance software in this menu. 3-3-2-1 „General‟ tab All general

92 Space Max Video File Size Defines the maximum file size of every video file. When the size of file exceeds this value, IP camera surveillance soft

93 3-3-2-2 „E-Mail Setting‟ tab If you want to use motion detection function and wish to get an email that contains the image captured by the camera

94 Edit Select an email address from „Recipient E-Mail Address‟ box, and click „Edit‟ to edit the email address. Delete Delete selected email addres

95 3-3-2-3 Security If you don‟t want other people to access this IP camera surveillance software, you can set a password to protect it. You‟ll nee

96 Here are the descriptions of all setting items: Item Description Enable Requires password authentication when this software starts. Disable Passw

97 3-4 Change Display Layout This IP camera surveillance software provides 8 kinds of display layout: Every layout displays different number of c

98 Layout style 3: 6 Cameras Displays the video of up to 6 cameras. Layout style 4: 8 Cameras Displays the video of up to 8 cameras