Edimax EW-7711UMn Instrukcja Użytkownika

7 2. The following message will appear on your computer, click ‘Cancel / Close’. Under Windows XP Under Windows Vista 3. Software Installat

8 If you lose the CD ROM or you prefer the traditional setup procedure, please follow the instruction as following step. 4. Execute ‘Setup.exe’ p

9 5. It is recommend installing driver and utility if the network card is installing the first time. If you want to update the driver only, choose ’

10 7. Now you’ll see the following message, please click ‘Install’ to start utility installation. If you see ‘Found New Hardware’ message again, ple

11 9. After installation is complete, wireless configuration utility will be shown in the desktop of your computer automatically. You will also see

12 11. Please note that if you stopped config utility by ‘Exit’ function, you’ll not be able to maintain the wireless link to the access point yo

13 2-2 Connect to Wireless Access Point After the driver is correctly installed, it will try to connect to any unencrypted wireless access point aut

14 2-2-1 Using Edimax Utility Please follow the following instructions to use Edimax configuration utility to connect to wireless access point. 1.

15 You can click ‘More / Less’ button again, and setup utility window will resume to its original size. Tip: If a setup item requires more

16 2-2-1-1 Scan for Other Wireless Devices There are two kinds of wireless connection mode: Infrastructure and Ad-Hoc. Infrastructure mode is used b

Copyright© by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a

17 another computer) with the SSID you wish to connect is shown here. Scan result includes 6 types of information, they are: A The SSID (Servic

18 If you can not see the access point you wish to connect here, please click ‘Rescan’ button to scan for access point again, until the one you prefe

19 There are 4 types of technical information: General: Displays basic information about this access point, such as SSID, MAC Address, authenticat

20 2-2-1-2 Connect to an Access Point If the wireless access point you wish to connect is found, you can establish connection with it by clicking ‘C

21 2. If the wireless access point does not have SSID, you’ll be prompted to input it now. Please ask the owner of wireless access point for the exa

22 4. Please ask the owner of the wireless access point you want to connect, and input the correct key here and then click ‘OK’. By checking ‘Show P

23

24 2-2-1-3 Add an Access Point to Profile If you will connect to some specific wireless access point frequently, you can add their information to th

25 Here are descriptions of every setup item: Item Name Description Profile Name You can give this profile a name. Every profile needs a unique n

26 Channel You can select the radio channel number for Ad-Hoc mode here.Power Save Mode Please select CAM (constantly awake mode, keep wireless radi

C A T A L O G Chapter I: Product Information ... ……1 1-1 Introduction and

27 will be selected automatically, and please do not change it. If you select ‘LEAP’, you’ll be prompted to input LEAD specific settings: Please in

28 To set 802.1x authentication for the access point. Please click ‘802.1X’ tab: Here are descriptions of every setup item: Item Name Descriptio

29 load .pac credential file; to remove a loaded credential file, click ‘Remove’. Session Resumption You can enable or disable session resumption her

30 2-2-2 Using Windows Zero Configuration Windows XP and Vista has a built-in wireless network configuration utility, called as ‘Windows Zero Config

31 3. Click ‘Start’ button (should be located at the bottom-left corner of windows desktop), click ‘Control Panel’, then click ‘Network and Internet

32 5. Right-click ‘Wireless Network Connection’ (it may have a number as suffix if you have more than one wireless network card, please make sure yo

33 7. If the access point is protected by encryption, you have to input its security key or passphrase here. It must match the encryption setting on

34 2-3 Profile Management If you need to connect to different wireless access points at different time, like of access point of your home, office, c

35 2-3-1 Add a profile If you want to click new profile, click ‘Profile’ menu, then click ‘Add’ button. You’ll be prompted to input detailed informa

36 2-3-2 Edit an existing profile If you have added a profile before, and you wish to change the content of the profile, you can use this function.

1 Chapter I: Product Information 1-1 Introduction and safety information Thank you for purchasing Edimax EW-7711UTn ( or EW-7711UAn / EW-7711UMn / E

37 2-3-3 Delete an existing profile If you no longer need a profile, you can delete it. Select the profile you wish to delete from the list, and cli

38 2-3-4 Activate a profile When you want to connect to a specific wireless device in the profile list, you can select it and click ‘Activate’ butto

39 2-4 Advanced Settings This wireless network card provides several advanced settings for experienced wireless users. You can change these settings

40 Here are descriptions of every setup item: Item Name Description Wireless mode Display the wireless operation mode of the network card. Enable

41 2-5 View Network Statistics The configuration utility provides information about network statistics and link status. If you want to know how your

42 2-6 WMM Setting This wireless network card provides WMM (Wi-Fi Multimedia) function, which can improve the performance of certain network applica

43 In ‘WMM Setup Status’ block, current WMM settings will be displayed. And here are descriptions of every setup item: Item Name Description WMM En

44 2-7 WPS Configuration Wi-Fi Protected Setup (WPS) is the latest wireless network technology which makes wireless network setup become very simple

45 2-7-1 WPS Button (Push-Button) With WPS button, it is easy to connect with a secure wireless network. If the wireless AP/Router supports WPS fe

46 You can also set ‘Config Mode’ to ‘Registrar’. In this mode, this wireless network card will wait for other WPS-enabled access points to send WPS

2 KEEP THIS NETWORK CARD OUT THE REACH OF CHILDREN! 4. This network card will become hot when being used for long time (This is normal and is not a

47 You can click ‘PBC’ button few more times to try again. When an access point is connected, you can click ‘Disconnect’ to disconnect your wirele

48 2-7-3 WPS Setup - PIN If the wireless access point you wish to connect supports PIN, please follow the following instructions to establish connec

49 4. Click ‘PIN’ button now, and wait for few seconds to one minute. If a wireless access point with correct PIN code is found, you’ll be connected

50 2-8 Radio On/Off You can switch the wireless radio transceiver on and off by the utility, so if you want to disable wireless network function, yo

51 2-9 About The ‘About’ tab provides you the information about version number of the configuration utility, driver, and other important information

52 2-10 On-line Help If you need to know the directions of how to use specific function in the utility, please click ‘Help’ button. On-line help doc

53 CHAPTER III: Soft-AP Function Excepting become a wireless client of other wireless access points, this wireless card can act as a wireless servic

54 A configuration window will appear after you switch the operation mode to ‘AP’, which asks you to assign an existing network card with internet co

55 Here are descriptions of every setup item: Item Name Description SSID Please input the SSID (the name used to identify this wireless access po

56 0: FCC (US, Canada, and other countries uses FCC radio communication standards) 1: ETSI (Europe) 2: SPAIN 3: FRANCE 4: MKK 5: MKKI (TELEC) 6: ISER

3 1-5 Familiar with your new wireless network card EW-7711UAn 1. USB Connector 2. Link/Activity LED 3. WPS Button 4. 3dBi high gain Antenna LE

57 3-2 Security Setting This wireless card supports wireless encryption in AP mode, which will encrypt the data being transferred over the air to en

58 Here are descriptions of every setup item: Item Name Description Authentication Type Please select a wireless authentication type you wish to us

59 3-3 Access Control If you’re not going to open your computer and wireless resources to the public, you can use MAC address filtering function to

60 Here are descriptions of every setup item: Item Name Description Access Policy Select the policy type of your access rule. Disable: Allow any w

61 3-4 Connection Table If you want to see the list of all wireless clients connected to this access point, please select ‘Mac Table’ tab from the u

62 3-5 Event Log This software access point will log all wireless-related activities as a log. Click ‘Event Log’ tab, and the event log will be disp

63 3-6 Statistics If you want to know detailed information about how your software access point works, click ‘Statistics’ tab, and the event log wil

64 3-7 About The ‘About’ tab provides you the information about version number of the configuration utility, driver, and other important information

65 CHAPTER IV: Appendix 4-1 Specification Standards: IEEE 802.11b/g Interface: USB 2.0 (USB 1.1 Compatible) Frequency Band: 2.4000 ~ 2.4835GHz (Indu

66 4-2 Troubleshooting If you encounter any problem when you’re using this wireless network card, don’t panic! Before you call your dealer of purchas

4 EW-7711UTn / EW-7711UMn 1. USB Connector 2. Connector Cap (To protect USB connector when not in use) 3. Link/Activity LED 4. WPS Button L

67 is slow / having problem when transferring large files 2. Disable ‘Tx Burst’ in ‘Advanced’ tab. 3. Enable ‘WMM’ in ‘QoS’ tab if you need to use

68 4-3 Glossary 1. What is the IEEE 802.11g standard? 802.11g is the new IEEE standard for high-speed wireless LAN communications that provides for

69 3. What is Ad-hoc? An Ad-hoc integrated wireless LAN is a group of computers, each has a Wireless LAN card, Connected as an independent wireless

70 7. What is TKIP? TKIP is a quick-fix method to quickly overcome the inherent weaknesses in WEP security, especially the reuse of encryption keys.

71 11. What is DSSS? What is FHSS? And what are their differences? Frequency-hopping spread-spectrum (FHSS) uses a narrowband carrier that change

72 13. What is WMM? Wi-Fi Multimedia (WMM), a group of features for wireless networks that improve the user experience for audio, video and voice a

73 15. What is GI? GI stands for Guard Interval. It’s a measure to protect wireless devices from cross- interference. If there are two wireless d

74 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital d

75 R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL

76

5 EW-7711US 1. USB Connector 2. Connector Cap (To protect USB connector when not in use) 3. Link/Activity LED 4. Antenna LED Name Light Status D

6 CHAPTER II: Driver Installation and Configuration 2-1 Network Card Installation Please follow the following instructions to install your new w