Edimax ES-5224R+ Instrukcja Użytkownika

ES-5224RM+ 24 L2 Managed Rackmount Switch User’s Manual

User Manual Publication date: July, 2006 Revision A2 4 1-2. Checklist Before you start installing the switch, verify that the package contains t

User Manual Publication date: July, 2006 Revision A2 94 Forward Delay: You can set the root bridge forward delay time. This figure is set by root

User Manual Publication date: July, 2006 Revision A2 95 3-9-3. STP Port Configuration Function name: STP Port Setting Function description: In the S

User Manual Publication date: July, 2006 Revision A2 96 802.1w RSTP recommended value: (Valid range: 1 – 200,000,000) 10 Mbps : 2,000,000 100

User Manual Publication date: July, 2006 Revision A2 97 M Check: Migration Check. It forces the port sending out an RSTP BPDU instead of a legacy ST

User Manual Publication date: July, 2006 Revision A2 98 3-10. Trunking Configuration The Port Trunking Configuration is used to configure the set

User Manual Publication date: July, 2006 Revision A2 99 Per Trunking Group supports a maximum of 4 ready member-ports. Please note that some decision

User Manual Publication date: July, 2006 Revision A2 100 Function name: Port Setting/Status Function description: Port setting/status is used to

User Manual Publication date: July, 2006 Revision A2 101 Aggtr: Aggtr is an abbreviation of “aggregator”. Every port is also an aggregator, and its o

User Manual Publication date: July, 2006 Revision A2 102 Function name: Aggregator View Function description: To display the current port trunki

User Manual Publication date: July, 2006 Revision A2 103 Function name: LACP Detail (LACP Aggregator Detailed Information) Function description: Sh

User Manual Publication date: July, 2006 Revision A2 5 • Supports 802.1Q VLAN with 256 entries. • Supports user management and limits three users to

User Manual Publication date: July, 2006 Revision A2 104 Fig. 3-39

User Manual Publication date: July, 2006 Revision A2 105 Function name: LACP System Configuration Function description: It is used to set the prio

User Manual Publication date: July, 2006 Revision A2 106 3-11. 802.1x Configuration 802.1x port-based network access control provides a method to

User Manual Publication date: July, 2006 Revision A2 107 The overview of operation flow for the Fig. 3-41 is quite simple. When Supplicant PAE issues

User Manual Publication date: July, 2006 Revision A2 108 The Fig. 3-43 shows the procedure of 802.1x authentication. There are steps for the

User Manual Publication date: July, 2006 Revision A2 109 8. If user ID and password is correct, the authentication server will send a Radius-Access-

User Manual Publication date: July, 2006 Revision A2 110 Only MultiHost 802.1X is the type of authentication supported in the switch. In this mod

User Manual Publication date: July, 2006 Revision A2 111 Function name: 802.1x State Setting Function description: This function is used to config

User Manual Publication date: July, 2006 Revision A2 112 Function name: 802.1x Mode Setting Function description: Set the operation mode of 802.

User Manual Publication date: July, 2006 Revision A2 113 Function name: Port Security Management Function description: Shows each port status. In Mu

User Manual Publication date: July, 2006 Revision A2 6 1-4. View of 24 Fast Ethernet + 2 Gigabit L2 Managed Switch 1-4-1. User Interfaces

User Manual Publication date: July, 2006 Revision A2 114 Fig. 3-46

User Manual Publication date: July, 2006 Revision A2 115 Function name: Param. Setting Function description: This function is used to configure the

User Manual Publication date: July, 2006 Revision A2 116 reAuthEnabled: Choose whether regular authentication will take place in this port. Defau

User Manual Publication date: July, 2006 Revision A2 117 3-12. Alarm Configuration Function name: Events Configuration Function description:

User Manual Publication date: July, 2006 Revision A2 118 Fig. 3-48 Function name: Email/SMS Configuration Function description: Alarm configu

User Manual Publication date: July, 2006 Revision A2 119 Parameter description: Email: Mail Server: the IP address of the server transferring your

User Manual Publication date: July, 2006 Revision A2 120 3-13. Configuration The switch supports three copies of configuration, including the def

User Manual Publication date: July, 2006 Revision A2 121 3-13-1. Save/Restore Function name: Save As Start Configuration Function description: Save

User Manual Publication date: July, 2006 Revision A2 122 Fig. 3-52

User Manual Publication date: July, 2006 Revision A2 123 Function name: Restore Default Configuration (includes default IP address) Function descrip

User Manual Publication date: July, 2006 Revision A2 7 • LED Indicators LED Color Function System LED CPURUN Green Lit when CPU is on and good

User Manual Publication date: July, 2006 Revision A2 124 Fig. 3-54

User Manual Publication date: July, 2006 Revision A2 125 Function name: Restore User Configuration Function description: Restore User Configuration

User Manual Publication date: July, 2006 Revision A2 126 3-13-2. Config File Function name: Config File Function description: With this function

User Manual Publication date: July, 2006 Revision A2 127 3-14. Security Function name: Mirror Configuration Function description: Mirror Configurat

User Manual Publication date: July, 2006 Revision A2 128 Fig. 3-57

User Manual Publication date: July, 2006 Revision A2 129 Function name: Isolated Group Function description: Isolated Group function can let the por

User Manual Publication date: July, 2006 Revision A2 130 Function name: Restricted Group Function description: The function of the Restricted Gr

User Manual Publication date: July, 2006 Revision A2 131 3-15. Bandwidth Management Function name: Ingress Bandwidth Setting Function description: I

User Manual Publication date: July, 2006 Revision A2 132 Function name: Egress Bandwidth Setting Function description: Egress Bandwidth Setting f

User Manual Publication date: July, 2006 Revision A2 133 Function name: Storm Setting Function description: Bandwidth Management function is used to

User Manual Publication date: July, 2006 Revision A2 8 1-4-2. User Interfaces on the Rear Panel One RS-232 DB-9 interface is offered for configur

User Manual Publication date: July, 2006 Revision A2 134 Storm Rate : Set up the limit of bandwidth for storm type you choose. Valid value of th

User Manual Publication date: July, 2006 Revision A2 135 3-16. QoS(Quality of Service) Configuration The switch supports 5 kinds of QoS, are as follo

User Manual Publication date: July, 2006 Revision A2 136 The QoS functions as we mentioned above are able to enabled at the same time. But, the f

User Manual Publication date: July, 2006 Revision A2 137 Function name: QoS Global Setting Function description: When you want to use QoS function,

User Manual Publication date: July, 2006 Revision A2 138 Fig. 3-63

User Manual Publication date: July, 2006 Revision A2 139 Function name: VIP Port Setting Function description: When the port is set as VIP Port, the

User Manual Publication date: July, 2006 Revision A2 140 Function name: 802.1p Setting Function description: This function will affect the prior

User Manual Publication date: July, 2006 Revision A2 141 Function name: D-Type TOS Function description: IP TOS Priority affect TOS fields of IP hea

User Manual Publication date: July, 2006 Revision A2 142 Fig. 3-66

User Manual Publication date: July, 2006 Revision A2 143 Function name: T-Type TOS Function description: IP TOS Priority affect TOS fields of IP head

User Manual Publication date: July, 2006 Revision A2 9 1-5. View of the Optional Modules In the switch, Port 25, 26 includes two types of media --- T

User Manual Publication date: July, 2006 Revision A2 144 Fig. 3-67

User Manual Publication date: July, 2006 Revision A2 145 Function name: R-Type TOS Function description: IP TOS Priority affect TOS fields of IP hea

User Manual Publication date: July, 2006 Revision A2 146 Fig. 3-68

User Manual Publication date: July, 2006 Revision A2 147 Function name: M-Type TOS Function description: IP TOS Priority affect TOS fields of IP hea

User Manual Publication date: July, 2006 Revision A2 148 Fig. 3-69

User Manual Publication date: July, 2006 Revision A2 149 Function name: DSCP Setting Function description: In the late 1990s, the IETF redefined the

User Manual Publication date: July, 2006 Revision A2 150 3-17. Diagnostics Three functions, including Diagnostics, Loopback Test and Ping Test ar

User Manual Publication date: July, 2006 Revision A2 151 Function name: Loopback Test Function description: In the Loopback Test function, there are

User Manual Publication date: July, 2006 Revision A2 152 Function name: Ping Test Function description: Ping Test function is a tool for detecti

User Manual Publication date: July, 2006 Revision A2 153 3-18. TFTP Server Function name: TFTP Server Function description: Set up IP address of TFT

User Manual Publication date: July, 2006 Revision A2 10 2. Installation 2-1. Starting 24 Fast Ethernet + 2 Gigabit L2 Managed Switch Up This secti

User Manual Publication date: July, 2006 Revision A2 154 3-19. Log This function shows the log data. The switch provides system log data for use

User Manual Publication date: July, 2006 Revision A2 155 Switch the enabled or disabled status of the auto upload function. Upload Log: Upload log d

User Manual Publication date: July, 2006 Revision A2 156 3-20. Firmware Upgrade Software upgrade tool is used to help upgrade the software functi

User Manual Publication date: July, 2006 Revision A2 157 3-21. Reboot We offer you many ways to reboot the switch, including power up, hardware rese

User Manual Publication date: July, 2006 Revision A2 158 3-22. Logout You can manually logout by performing Logout function. In the switch, it pr

User Manual Publication date: July, 2006 Revision A2 159 4. Operation of CLI Management 4-1. CLI Management Refer to Chapter 2 for basic

User Manual Publication date: July, 2006 Revision A2 160 Fig. 4-1

User Manual Publication date: July, 2006 Revision A2 161 Fig. 4-2

User Manual Publication date: July, 2006 Revision A2 162 4-2. Commands of CLI To see the commands of the mode, please input “?” after the prompt,

User Manual Publication date: July, 2006 Revision A2 163 4-2-1. Global Commands of CLI end Syntax: end Description: Back to the top mode. When you

User Manual Publication date: July, 2006 Revision A2 11 • TP Port and Cable Installation ⇒ In the switch, TP port supports MDI/MDI-X auto-crossover

User Manual Publication date: July, 2006 Revision A2 164 help Syntax: help Description: To show available commands. Some commands are the combin

User Manual Publication date: July, 2006 Revision A2 165 history Syntax: history [#] Description: To show a list of previous commands that you had e

User Manual Publication date: July, 2006 Revision A2 166 logout Syntax: logout Description: When you enter this command via Telnet connection,

User Manual Publication date: July, 2006 Revision A2 167 restore user Syntax: restore user Description: To restore the startup configuration as use

User Manual Publication date: July, 2006 Revision A2 168 save user Syntax: save user Description: To save the current configuration as the user

User Manual Publication date: July, 2006 Revision A2 169 4-2-2. Local Commands of CLI  802.1x set max-request Syntax: set max-request <port-r

User Manual Publication date: July, 2006 Revision A2 170 set port-control Syntax: set port-control <port-range> <authorized> Descri

User Manual Publication date: July, 2006 Revision A2 171 set reAuthMax Syntax: set reAuthMax <port-range> <max> Description: The numbe

User Manual Publication date: July, 2006 Revision A2 172 set state Syntax: set state <ip> <port-number> <secret-key> Descript

User Manual Publication date: July, 2006 Revision A2 173 show mode Syntax: show mode Description: To display the mode of each port. Argument: Non

User Manual Publication date: July, 2006 Revision A2 12 2-1-2. Installing Chassis to a 19-Inch Wiring Closet Rail Caution: Allow a proper spa

User Manual Publication date: July, 2006 Revision A2 174 show security Syntax: show security Description: To display the authentication statu

User Manual Publication date: July, 2006 Revision A2 175  account add Syntax: add <name> Description: To create a new guest user. When you c

User Manual Publication date: July, 2006 Revision A2 176 modify Syntax: modify <name> Description: To change the username and password of

User Manual Publication date: July, 2006 Revision A2 177  alarm <<email>> del mail-address Syntax: del mail-address <#> Desc

User Manual Publication date: July, 2006 Revision A2 178 set server Syntax: set server <ip> Description: To set up the IP address of the

User Manual Publication date: July, 2006 Revision A2 179 <<events>> del all Syntax: del all <range> Description: To disable email

User Manual Publication date: July, 2006 Revision A2 180 del trap Syntax: del trap <range> Description: To disable the trap of the events

User Manual Publication date: July, 2006 Revision A2 181 set sms Syntax: set sms <range> Description: To enable the sms of the events. Argume

User Manual Publication date: July, 2006 Revision A2 182 show Syntax: show Description: The Show here is used to display the configuration of a

User Manual Publication date: July, 2006 Revision A2 183 show (alarm) Syntax: show Description: The Show for alarm here is used to display the conf

User Manual Publication date: July, 2006 Revision A2 13 2-1-3-1. Cabling Requirements for TP Ports ⇒ For Fast Ethernet TP network connection ⎯ The

User Manual Publication date: July, 2006 Revision A2 184 set phone-number Syntax: set phone-number <#> <phone-number> Description:

User Manual Publication date: July, 2006 Revision A2 185 show Syntax: show Description: To display the configuration of SMS trap event. Argument: N

User Manual Publication date: July, 2006 Revision A2 186  autologout autologout Syntax: autologout <time> Description: To set up the t

User Manual Publication date: July, 2006 Revision A2 187 set storm-rate Syntax: set storm-rate <range> <data_rate> Description: To se

User Manual Publication date: July, 2006 Revision A2 188  config-file export start Syntax: export start Description: To run the export start

User Manual Publication date: July, 2006 Revision A2 189 import user-conf Syntax: import user-conf Description: To run the import user-conf funct

User Manual Publication date: July, 2006 Revision A2 190 show Syntax: show Description: To display the information of the config file. Argume

User Manual Publication date: July, 2006 Revision A2 191  diag diag Syntax: diag Description: Diag is used to test whether EEPROM, UART, DRAM and

User Manual Publication date: July, 2006 Revision A2 192  firmware set upgrade-path Syntax: set upgrade-path <filepath> Description: T

User Manual Publication date: July, 2006 Revision A2 193  gvrp disable Syntax: disable Description: To disable the gvrp function Argument: None.

User Manual Publication date: July, 2006 Revision A2 14 2-1-3-3. Switch Cascading in Topology • Takes the Delay Time into Account Theoretically,

User Manual Publication date: July, 2006 Revision A2 194 (gvrp)# group 2 (gvrp-group-2)# set applicant 1-6 non-participant (gvrp-group-2)# sh

User Manual Publication date: July, 2006 Revision A2 195 set applicant Syntax: set applicant <range> <normal|non-participant> Descript

User Manual Publication date: July, 2006 Revision A2 196 Example: (gvrp)# set restricted 1-10 enable (gvrp)# show config GVRP state: Enable Po

User Manual Publication date: July, 2006 Revision A2 197 set timer Syntax: set timer <range> <join> <leave> <leaveall> Des

User Manual Publication date: July, 2006 Revision A2 198 show counter Syntax: show counter <port> Description: To show counter of the p

User Manual Publication date: July, 2006 Revision A2 199  hostname hostname Syntax: hostname <name> Description: To set up the hostname o

User Manual Publication date: July, 2006 Revision A2 200 set mode Syntax: set mode <status> Description: To set up the mode of IGMP Sno

User Manual Publication date: July, 2006 Revision A2 201  IP disable dhcp Syntax: disable dhcp Description: To disable the DHCP function of the

User Manual Publication date: July, 2006 Revision A2 202 set ip Syntax: set ip <ip> <mask> <gateway> Description: To set th

User Manual Publication date: July, 2006 Revision A2 203  log clear Syntax: clear Description: To clear the log data. Argument: None. Possible val

User Manual Publication date: July, 2006 Revision A2 15 Case1: All switch ports are in the same local area network. Every port can access

User Manual Publication date: July, 2006 Revision A2 204 show Syntax: show Description: To show a list of trap log events. When any of log even

User Manual Publication date: July, 2006 Revision A2 205  mac-table <<alias>> del Syntax: del <mac> Description: To delete th

User Manual Publication date: July, 2006 Revision A2 206 <<information>> search Syntax: search <port> <mac> <vid>

User Manual Publication date: July, 2006 Revision A2 207 <<maintain>> set aging Syntax: set aging <time> Description: To set up

User Manual Publication date: July, 2006 Revision A2 208 Example: (mac-table-maintain)# show Mac table ageout time: 300 seconds Port Dynamical

User Manual Publication date: July, 2006 Revision A2 209 del Syntax: del <mac> Description: To remove the static mac entry. Argument: <

User Manual Publication date: July, 2006 Revision A2 210  management add Syntax: Usage: set [<name> <value>] [<vid> <v

User Manual Publication date: July, 2006 Revision A2 211 delete Syntax: delete # Description: To delete a specific record or range. Argument: [#]:

User Manual Publication date: July, 2006 Revision A2 212 Example: (management)# edit 1 (management-edit-1)# set name Tom vid 2 ip 192.168.1.30

User Manual Publication date: July, 2006 Revision A2 213  port clear counter Syntax: clear counter Description: To clear all ports’ counter (in

User Manual Publication date: July, 2006 Revision A2 16 Case 2b: Port-based VLAN (See Fig.2-5). 1. VLAN1 members could not access VLAN2, V

User Manual Publication date: July, 2006 Revision A2 214 set flow-control Syntax: set flow-control <range> <symmetric|asymmetric>

User Manual Publication date: July, 2006 Revision A2 215 show conf Syntax: show conf Description: To display the each port’s configuration about

User Manual Publication date: July, 2006 Revision A2 216 Port 25 Fiber Media Information -------------------------------------------------------

User Manual Publication date: July, 2006 Revision A2 217 show status Syntax: show status Description: To display the port’s current status. Argu

User Manual Publication date: July, 2006 Revision A2 218  qos disable 1p Syntax: disable 1p Description: To disable 802.1p qos. Argument: No

User Manual Publication date: July, 2006 Revision A2 219 disable tos Syntax: disable tos Description: To disable IP TOS qos. Argument: None. Poss

User Manual Publication date: July, 2006 Revision A2 220 enable qos Syntax: enable qos Description: To enable qos function. Argument: None.

User Manual Publication date: July, 2006 Revision A2 221 set pri-tag Syntax: set pri-tag [<q0><priority>] [<q1><priority>]

User Manual Publication date: July, 2006 Revision A2 222 Possible value: <type_value>: 0~3 <priority>: 0 to 7. Exampl

User Manual Publication date: July, 2006 Revision A2 223 DiffServ Queue DiffServ Queue DiffServ Queue DiffServ Queue --------- -------

User Manual Publication date: July, 2006 Revision A2 17 2-1-4. Configuring the Management Agent of 24 Fast Ethernet + 2 Gigabit L2 Managed Switch We

User Manual Publication date: July, 2006 Revision A2 224 show priority-tag Syntax: show priority-tag Description: To show 802.1p Qos configur

User Manual Publication date: July, 2006 Revision A2 225 show tos Syntax: show tos Description: To show IP tos Qos configuration. Argument: none

User Manual Publication date: July, 2006 Revision A2 226  reboot reboot Syntax: reboot Description: To reboot the system. Argument: None. Pos

User Manual Publication date: July, 2006 Revision A2 227 <<mirror>> disable Syntax: disable Description: To disable the function of m

User Manual Publication date: July, 2006 Revision A2 228 show Syntax: show Description: To display the current setting status of mirror. Argum

User Manual Publication date: July, 2006 Revision A2 229  snmp disable Syntax: disable set-community disable snmp Description: The Disable here i

User Manual Publication date: July, 2006 Revision A2 230 set Syntax: set get-community <community> set set-community <community> s

User Manual Publication date: July, 2006 Revision A2 231  stp MCheck Syntax: MCheck <range> Description: To force the port to transmit RST

User Manual Publication date: July, 2006 Revision A2 232 set config Syntax: set config <Bridge Priority> <Hello Time> <Max. Age&

User Manual Publication date: July, 2006 Revision A2 233 show config Syntax: show config Description: To display the STP configuration data. Argum

User Manual Publication date: July, 2006 Revision A2 18 2-1-4-1. Configuring the Management Agent of 24 Fast Ethernet + 2 Gigabit L2 Managed Swit

User Manual Publication date: July, 2006 Revision A2 234 show status Syntax: show status Description: To display of the status of STP. Argumen

User Manual Publication date: July, 2006 Revision A2 235  system set contact Syntax: set contact <contact> Description: To set the cont

User Manual Publication date: July, 2006 Revision A2 236 show Syntax: show Description: To display the basic information of the switch. Argum

User Manual Publication date: July, 2006 Revision A2 237  tftp set server Syntax: set server <ip> Description: To set up the IP address of

User Manual Publication date: July, 2006 Revision A2 238  time set daylightsaving Syntax: set daylightsaving <hr> <MM/DD/HH> <m

User Manual Publication date: July, 2006 Revision A2 239 set ntp Syntax: set ntp <ip> <timezone> Description: To set up the current tim

User Manual Publication date: July, 2006 Revision A2 240  trunk del trunk Syntax: del trunk <port-range> Description: To remove the tr

User Manual Publication date: July, 2006 Revision A2 241 set trunk Syntax: set trunk <port-range> <method> <group> <active LA

User Manual Publication date: July, 2006 Revision A2 242 show lacp-config Syntax: show lacp-config Description: To display the value of LACP

User Manual Publication date: July, 2006 Revision A2 243 show status Syntax: show status Description: To display the aggregator status and the se

User Manual Publication date: July, 2006 Revision A2 19 • Set IP Address, Subnet Mask and Default Gateway IP Address Please refer to Fig. 2-7 CLI Man

User Manual Publication date: July, 2006 Revision A2 244  vlan del port-group Syntax: del port-group <name> Description: To delete the p

User Manual Publication date: July, 2006 Revision A2 245 disable drop-untag Syntax: disable drop-untag <port_range> Description: To disable d

User Manual Publication date: July, 2006 Revision A2 246 enable double-tag Syntax: enable double-tag Description: To enable double-tag. Argumen

User Manual Publication date: July, 2006 Revision A2 247 enable symmetric Syntax: enable symmetric Description: To drop frames from the non-member

User Manual Publication date: July, 2006 Revision A2 248 set pvid Syntax: set pvid <port_range> <pvid> <default_priority> Des

User Manual Publication date: July, 2006 Revision A2 249 show config Syntax: show config Description: To display the current vlan mode, Symmetric v

User Manual Publication date: July, 2006 Revision A2 250 show pvid Syntax: show pvid Description: To display pvid, priority and drop untag resu

User Manual Publication date: July, 2006 Revision A2 251  vs disable Syntax: disable Description: To disable the virtual stack. Argument: None. P

User Manual Publication date: July, 2006 Revision A2 252 set role Syntax: set role <master|slave> Description: To set role. Argument: &l

User Manual Publication date: July, 2006 Revision A2 253 5. Maintenance 5-1. Resolving No Link Condition The possible causes for a no link LED sta

User Manual Publication date: July, 2006 Revision A2 20 2-1-4-2. Configuring the Management Agent of 24 Fast Ethernet + 2 Gigabit L2 Managed Swit

User Manual Publication date: July, 2006 Revision A2 254 Appendix A Technical Specifications Features • The switch included 24-Port 10/100Mbps

User Manual Publication date: July, 2006 Revision A2 255 Hardware Specifications  Standard Compliance: IEEE802.3ab / 802.3z / 802.3u / 802.3x

User Manual Publication date: July, 2006 Revision A2 256  Diagnostic LED: System LED : Power CPURUN ACT (LEDSET) FDX (LEDSET) SPD (LEDS

User Manual Publication date: July, 2006 Revision A2 257 Management Software Specifications System Configuration Auto-negotiation support on 10/10

User Manual Publication date: July, 2006 Revision A2 258 Appendix B Null Modem Cable Specifications The DB-9 cable is used for connecting a te

User Manual Publication date: July, 2006 Revision A2 21 Fig. 2-10 the Login Screen for Web 2-1-5. IP Address Assignment For IP ad

User Manual Publication date: July, 2006 Revision A2 22 With the classful addressing, it divides IP address into three classes, class A, class B

User Manual Publication date: July, 2006 Revision A2 23 Class D and E: Class D is a class with first 4 MSB (Most significance bit) set to 1-1-1-0 and

24 X 10/100Base-Tx + 2 X Gigabit TP/SFP L2 Managed Rackmount Switch User's Manual Release 2.04

User Manual Publication date: July, 2006 Revision A2 24 In this diagram, you can see the subnet mask with 25-bit long, 255.255.255.128, contains

User Manual Publication date: July, 2006 Revision A2 25 For different network applications, the subnet mask may look like 255.255.255.240. This means

User Manual Publication date: July, 2006 Revision A2 26 2-2. Typical Applications The 24 Fast Ethernet + 2 Gigabit L2 Managed Switch implements

User Manual Publication date: July, 2006 Revision A2 27 Fig. 2-15 Office Network Connection Fig. 2-14 Peer-to-peer Network Connection

User Manual Publication date: July, 2006 Revision A2 28 3. Operation of Web-based Management This chapter instructs you how to configure and m

User Manual Publication date: July, 2006 Revision A2 29 In the switch, it supports a simple user management function allowing only one administrator

User Manual Publication date: July, 2006 Revision A2 30 3-1. Web Management Home Overview After you login, the switch shows you the system inform

User Manual Publication date: July, 2006 Revision A2 31 Fig. 3-3 port detail information In Fig. 3-3, it shows the

User Manual Publication date: July, 2006 Revision A2 32 PortDHCP Boot VLANSystemSNMPIGMP SnoopingMAC TableGVRPRoot STPTrunk802.1xAlarmConfigur

User Manual Publication date: July, 2006 Revision A2 33 3-1-1. System Information Function name: System Information Function description: Show the b

ii Table of Contents CAUTION--------------------------------------------------------------------------------------IV ELECTRONIC EMISSION NOTICES --

User Manual Publication date: July, 2006 Revision A2 34 Host IP address: The IP address of the switch. Host MAC address: It is the Ethernet MAC

User Manual Publication date: July, 2006 Revision A2 35 3-1-2. IP Configuration IP configuration is one of the most important configurations in the s

User Manual Publication date: July, 2006 Revision A2 36 Default: Disable IP address: Users can configure the IP settings and fill in new values

User Manual Publication date: July, 2006 Revision A2 37 DNS: It is Domain Name Server used to serve the translation between IP address and name addre

User Manual Publication date: July, 2006 Revision A2 38 3-1-3. Time Configuration The switch provides manual and automatic ways to set the syste

User Manual Publication date: July, 2006 Revision A2 39 NTP: NTP is Network Time Protocol and is used to sync the network time based Greenwich Mean T

User Manual Publication date: July, 2006 Revision A2 40 Day Light Saving End : This is used to set when to stop performing the daylight saving ti

User Manual Publication date: July, 2006 Revision A2 41 3-1-4. Account Configuration In this function, only administrator can create, modify or delet

User Manual Publication date: July, 2006 Revision A2 42 3-1-5. Management Security Through the management security configuration, the manager can

User Manual Publication date: July, 2006 Revision A2 43 Function name: Management Security Configuration Function description: The switch offers Man

iii 3-3. SNMP CONFIGURATION-------------------------------------------------------------60 3-4. DHCP BOOT--------------------------------------------

User Manual Publication date: July, 2006 Revision A2 44 IP Range: The switch supports two kinds of options for managed valid IP Range, includin

User Manual Publication date: July, 2006 Revision A2 45 3-1-6. Virtual Stack Function name: Virtual Stack Function description: Virtual Stack Manage

User Manual Publication date: July, 2006 Revision A2 46 Fig. 3-8 Parameter description: State: It is used for the activation or de-activ

User Manual Publication date: July, 2006 Revision A2 47 Fig. 3-9

User Manual Publication date: July, 2006 Revision A2 48 3-2. Port Configuration Four functions, including Port Status, Port Configuration, Simple

User Manual Publication date: July, 2006 Revision A2 49 Function name: Port Status Function Description: Report the latest updated status of all p

User Manual Publication date: July, 2006 Revision A2 50 Default: Enabled Speed / Duplex : Display the speed and duplex of all port. There are th

User Manual Publication date: July, 2006 Revision A2 51 Fig. 3-11 Parameter description of Port 25 and Port 26: Connector Type: Display the c

User Manual Publication date: July, 2006 Revision A2 52 Vendor SN (Serial Number): Show the serial number assigned by the manufacturer. Date Cod

User Manual Publication date: July, 2006 Revision A2 53 3-2-2. Port Configuration Port Configuration is applied to change the setting of each port. I

iv Caution Circuit devices are sensitive to static electricity, which can damage their delicate electronics. Dry weather conditions or walking acro

User Manual Publication date: July, 2006 Revision A2 54 Speed/Duplex: Set the speed and duplex of the port. In speed, 10/100Mbps baud rate is av

User Manual Publication date: July, 2006 Revision A2 55 3-2-3. Simple Counter The function of Simple Counter collects any information and provides t

User Manual Publication date: July, 2006 Revision A2 56 Rx Packet: The counting number of the packet received. Tx Collision: Number of collision

User Manual Publication date: July, 2006 Revision A2 57 3-2-4. Detail Counter The function of Detail Counter collects any information and provides th

User Manual Publication date: July, 2006 Revision A2 58 Number of bad packets received. Rx Unicast Packets: Show the counting number of the recei

User Manual Publication date: July, 2006 Revision A2 59 Packets 512-1023 Octets: Number of 512 ~ 1023-byte frames in good and bad packets received.

User Manual Publication date: July, 2006 Revision A2 60 3-3. SNMP Configuration Any Network Management System (NMS) running the Simple Network Ma

User Manual Publication date: July, 2006 Revision A2 61 Default SNMP function : Enable Default community name for GET: public Default community name

User Manual Publication date: July, 2006 Revision A2 62 3-4. DHCP Boot The DHCP Boot function is used to spread the request broadcast packet int

User Manual Publication date: July, 2006 Revision A2 63 3-5. IGMP Snooping The function, IGMP Snooping, is used to establish the multicast groups to

Publication date: January, 2006 Revision A2 1 About this user’s manual In this user’s manual, it will not only tell you how to install and connect

User Manual Publication date: July, 2006 Revision A2 64 Parameter description: IGMP snooping mode selection: The switch supports three kinds of

User Manual Publication date: July, 2006 Revision A2 65 Function name: Allowed Group Function description: The Allowed Group function allows the IGM

User Manual Publication date: July, 2006 Revision A2 66 configuration if ”Custom” had been chosen. Add: A new entry of allowed group configurat

User Manual Publication date: July, 2006 Revision A2 67 3-6. VLAN The switch supports Tag-based VLAN (802.1q) and Port-based VLAN. Support 256 acti

User Manual Publication date: July, 2006 Revision A2 68 Symmetric Vlan: This is a Ingress Rule (Rule 1, The Ingress Filtering Rule 1 is “forward

User Manual Publication date: July, 2006 Revision A2 69 Fig. 3-19 3-6-2. Tag-based Group Function name: Tag-based Group Configuration Function d

User Manual Publication date: July, 2006 Revision A2 70 Fig. 3-20

User Manual Publication date: July, 2006 Revision A2 71 Add Group: Input the VLAN name, VID and then choose the member by ticking the check box besid

User Manual Publication date: July, 2006 Revision A2 72 Fig. 3-22 Edit a group: Just select a group entry and press the <Edit> button, the

User Manual Publication date: July, 2006 Revision A2 73 3-6-3. PVID Function name: PVID Function description: In PVID Setting, user can input VID nu

User Manual Publication date: July, 2006 Revision A2 2 1. Introduction 1-1. Overview of 24 Fast Ethernet + 2 Gigabit L2 Managed Switch 24 Fast E

User Manual Publication date: July, 2006 Revision A2 74 untagged packets to port 2, these packets will own priority 2 precedence due to your defau

User Manual Publication date: July, 2006 Revision A2 75 3-6-4. Port-based Group Function name: Port-based Group Configuration Function description:

User Manual Publication date: July, 2006 Revision A2 76 Add Group: Create a new Port-based VLAN. Input the VLAN name and choose the member by tic

User Manual Publication date: July, 2006 Revision A2 77 Edit a group: Just select a group entry and press the <Edit> button, then you can modi

User Manual Publication date: July, 2006 Revision A2 78 3-7. MAC Table MAC Table Configuration gathers many functions, including MAC Table Inform

User Manual Publication date: July, 2006 Revision A2 79 Port: The port that exists in the searched MAC Entry. VID: VLAN Group that MAC Entry exists.

User Manual Publication date: July, 2006 Revision A2 80 Function Name: MAC Table Maintenance Function Description: This function can allow the us

User Manual Publication date: July, 2006 Revision A2 81 Function Name: Static Setting Function Description: The function of Static is used to configu

User Manual Publication date: July, 2006 Revision A2 82 Queue (Priority): Set up the priority( 0~3) for the MAC. Forwarding Rule(Drop Policy):

User Manual Publication date: July, 2006 Revision A2 83 Function name: MAC Alias Function description: MAC Alias function is used to let you assign M

User Manual Publication date: July, 2006 Revision A2 3 • Key Features in the Device QoS: Support Quality of Service by the IEEE 802.1P standard. Th

User Manual Publication date: July, 2006 Revision A2 84 Parameter description: MAC Address: It is a six-byte long Ethernet hardware address and

User Manual Publication date: July, 2006 Revision A2 85 3-8. GVRP Configuration GVRP is an application based on Generic Attribute Registration Protoc

User Manual Publication date: July, 2006 Revision A2 86 Function name: GVRP Config Function description: In the function of GVRP Config, it is

User Manual Publication date: July, 2006 Revision A2 87 Normal: It is Normal Registration. The Registrar responds normally to incoming GARP message

User Manual Publication date: July, 2006 Revision A2 88 Function name: GVRP Counter Function description: All GVRP counters are mainly divided

User Manual Publication date: July, 2006 Revision A2 89 Number of GARP BPDU with Join In message is received by the GARP application. LeaveEmpty Mess

User Manual Publication date: July, 2006 Revision A2 90 Function name: GVRP Group Information Function description: To show the dynamic group me

User Manual Publication date: July, 2006 Revision A2 91 3-9. STP Configuration The Spanning Tree Protocol (STP) is a standardized method (IEEE 802.1D

User Manual Publication date: July, 2006 Revision A2 92 All bridges in the LAN will re-learn and determine which the root bridge is. Maximum Age

User Manual Publication date: July, 2006 Revision A2 93 3-9-2. STP Configuration The STP, Spanning Tree Protocol, actually includes RSTP. In the Spa